Install Mosquitto on a Raspberry Pi

01-28-2018 Alex 0

In this tutorial we’ll learn how to install Mosquitto on a Raspberry Pi. The goal is to use the Raspberry Pi as a MQTT broker in an IoT application. We’ll install Mosquitto, configure it and test it to make sure everything was correctly set up.

Final power supply board

How to build a dual voltage power supply for your breadboard

01-14-2018 Alex 0

One of the most popular articles on this website is the tutorial on how to build a 5V power supply on a breadboard. Following up on that, today we’re going to build a power supply that can output both 3.3V and 5V at the same time. This is particularly useful for circuits where both voltages are needed. We will solder the components on a small protoboard, which will conveniently plug directly into the power rails of our breadboard.